
Industrial mixers
Continuous twin-shaft mixer
Continuous twin-shaft mixer for clay, ceramic bodies, cement-based mixes and sludge — mixes and conveys at the same time, at a constant rate between 1 and 30 m³/h.
Also known as: pug mill mixer · pugmill · continuous clay mixer · continuous paddle mixer
Individually sized on your material and your process. Technical proposal and price normally within 48 hours. Delivery across the EU and the Republic of Moldova.
How it works
This is a twin-shaft mixer working in continuous flow, intended for viscous and plastic materials: clay and ceramic bodies, cement-based mixes, sludge and similar compositions. It is installed in the line, between the feed and the downstream machine, which it supplies with homogeneous material at a constant rate.
The two parallel shafts, fitted with helically arranged paddles, mix the material and convey it simultaneously from the feed opening to the discharge. Along the way, the composition is continuously sheared and kneaded between the paddles and the mixing chamber walls — the plasticising process characteristic of clay working — and what leaves the discharge is a uniform mass with evenly distributed moisture.
The mixing chamber and paddles are built in treated wear-resistant steel, with individually replaceable paddles and, on request, in stainless for corrosive media. The throughput is matched to the line by adjusting the speed from a frequency inverter, and hinged covers give quick access for cleaning and paddle changes.
Continuous operation
Mixes and conveys at once — constant rate to the downstream machine.
Plasticising by shear
Continuous kneading between the paddles and the mixing chamber.
Replaceable wear-resistant paddles
Treated steel, changed individually — low maintenance cost.
Adjustable throughput
Speed from a frequency inverter, matched to the pace of the line.
When to choose it
The concrete situations in which this machine is the right answer — and the one in which we would point you to something else in our range.
The line runs continuously rather than in batches: the downstream machine has to be fed constantly with homogeneous material at a steady rate.
You process clay or ceramic bodies that have to be plasticised — the continuous shear between paddles and walls is the plasticising process itself.
The material has uneven moisture at the inlet and it has to be equalised before the next machine.
The composition is abrasive and you want cheap maintenance: paddles are replaced individually, without changing the mixing chamber.
When this is NOT the right machine
If you produce on frequently changing recipes and need traceability for every batch, a continuous machine does not give you lot separation.
See Twin-shaft mixer


